Basic Info.
Application Method
Electrostatic Spray
Work Type1
on-Ground and Accessible
Apply to
Electrostatic Powder Coating
Work Type2
2 Working Stations
Work Type3
Exit and Entrance on Side
Inside Size
L 2500 * H 2500 * W2500
Type
Electrostatic Spraying Equipment
Application
Hardware Spraying Equipment, Wood Spraying Equipment, Plastic Spraying Equipment, Porcelain Spraying Equipment
Transport Package
Wood Case
Specification
customized depend on requirments
Product Description
There are 4 frequently used types of manual powder coating booth1,Manual powder spray booth with single working stationParameters:- Inner size: H 1700 * W 1170 *L 1150 mm- Opening size: H 1400 * W 2320 mm- Control panel: Chinese/English display- Made of galvanized steel, powder coated on the surface. High light and smooth- LED lighting system with sealing independently, installed on the top of booth (28 W) - Down packing, easy to transport and assemble- Fan power 3KW- The Fan is connected with booth by anti-flaming soft tubes, avoiding resonance and reducing noise- 4 units automatic pulse blow-back powder recovery system, single stage Specification | Booth material | Made of galvanized steel, high smoothness, rust-proof and poor spray adhesion. |
| Surface treatment | Electrostatic powder coated surface, smooth and easy to clean. |
| Structure | Assembled structure, down packing,easy to transport |
| Pedestal shape | Flat pedestal, easy to clean. |
| Lighting system | One set of independent sealing lighting system, it's difficult to get dirty and provides sufficient light. |
| Spray work station | 1 spray work stations |
| Recovery system | 1 set of automatic single-stage pulse blow-back recovery system |
| Fixed Fan | Fan is supported on the holder independently |
| shock absorption of Fan | shock absorption cushion |
| Prevent the resonance | The blower connected with booth by anti-flaming soft tubes. |
| Winding direction | Blower's outlet can be adjustable in four direction (90 degrees) |
Control system
| Chinese and English display panel,
All of fan,recovery system,lighting system can control independently |
| Digital pulse control, by setting parameters of off memory, you can control pulse width,pulse interval,quantity of pulse unit and checking if the function of pulse blowback is working properly |
On-ground type powder coating booth provides a relatively closed environment to stop the powder from going outside, which can not only avoid polluting the environment, but also recycle the powder. As the booth is installed directly on the ground, the operators and workpieces can freely go into and out of the booth. Also, it is very convenient for the operators to adjust the distance between the powder coating guns and workpieces, hence it can improve the quality of the painting work.
Description and application
| Model No. | PCB-25001 |
| Structure | Packing down, easy to transport
Ground type, staff could go inside for painting |
| External Size(mm) | 2580(L)*3355(W)*3040(H) |
| Internal Size(mm) | 2500(L)*2500(W)*2200(H) |
| Cabin System | Made by galvanized steel, powder coated on the surface. |
| Powder Recovery System | Dust filter cartridges*6 sets, each size 600mm*Ø320mm |
| Solenoid valves*6 sets, the holeØ20mm,DC24V |
| Circulation System | 1 set of centrifugal blower, 7.5kw motor, air flow6000-9000m³/h
The blower connected with booth by anti-flaming soft tubes
The exhaust vent of the blower could be adjusted in four directions |
| Blower Holder System | Made by 80*80 square tubes
Independent from the booth to prevent the resonance and reduce the noise |
| Lighting System | 6 sets of explosion proof lights,2 LED lights,14W for each , total 12 |
Control System
| 1 set, control the fan and powder recovery system
Chinese and English display panel,
All of fan,recovery system,lighting system can control independently |
| Material | Made of galvanized steel, high smoothness, prevent to get rust, and high spray adhesion. |
| Surface treatment | Electrostatic powder coated surface, smooth and easy to clean. |
| Bases structure | Assembled structure, easy to transport |
| Roof shape | Arc structure on the top, easy to clean. |
| Work station | 2 spray work stations |
| Recovery system | 2 set of automatic pulse blow-back single-stage recovery system |
| Fixed Fan | Fan is supported on the holder |
| Shock absorption of Fan | shock absorption cushion |
| Shockproof | The blower connected with booth by anti-flaming soft tubes. |
| Winding direction | Blower's outlet can be adjustable in four direction (90 degrees) |
| Control cabinet | Chinese and English display panel, all the fan,recovery system,lighting system can control independently |
| Control method | Digital pulse control, by setting parameters of off memory, you can control pulse width,pulse interval,quantity of pulse unit and checking if the function of pulse blowback is working properly |
| Except 2 working opening, there are also 1 exit and 1 entrance opening on opposite sides. There is a rail throughout the booth, thus the workpieces can drift in-and-out the booth through the rail. Its apply to the coating of large panel workpieces. |
| The booth is made of galvanized steel, powder coated on the surface. That made it beautiful, long servicing life and easy cleaning. |
| Packing down, easy to transport. |
| Isolated LED proof light, achieving rated brightness in 0.5s after electrify. |
| 4 units pulse blowback single-stage recovery system, cleaning the blocking powder on the filter automatically. |
| Independent blower holder, connected with the booth by a soft anti-flaming tube to prevent the resonance and reduce the noise. |
| The independent carriage of Fan can adjust the direction of air exhaust( 90 degrees spacing rotation ), convenient to connected to the outside with PVC tube. |
There is a interface that transformed square to round on the outlet of the fan, thus the standard circular PVC tube can be used as the exhaust duct, allowing for easy installation
|
| Back to the recovery system, it set up 2 doors with sealed strip. People shouldn't enter the booth when changing filters. |
| Door lock of the recovery system has the function of automatic tension, it can able to compact sealed strips, in case of powder leakage. |
Bilingual board, digital pulse control programmer, pulse control the microcomputer core, digital display, set and use easily and stable operation.
|
https://qdzhongbang.en.made-in-china.com
I f you interested in our products, please feel free to contact me. We can customized all kinds of equipments about powder coating and provide you a solution according to your actual conditions.
Welcome to visit our factory, we have samples in stock for your site visit.
Address:
18, Jinshan Road,Laixi Economic Development Zone, Qingdao City, Shandong Province.
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Qingdao Zhongbang Science and Tech Development Co., Ltd is a leading manufacture of powder coating equipment. From manual powder coating gun to full automatic powder coating line, Zhongbang can meet all your needs in powder coating area. We can also supply the powder coating solutions to customers according to their workshop and real needs. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers′ requirements" for the management and "zero defect, zero complaints" as the quality objective.
Established in 2005, we are covering design, development and manufacture of powder coating and liquid coating equipments. We are National High-Tech Enterprise. Now we had got 13 technical patents in this area. We are not only a good supplier, but also an excellent solution provider and problem solver.
Our annual sales figure that exceeds USD2000, 0000. As a result of our high quality products and outstanding customer service, we have gained a global sales network.
If you are interested in any products or would like to discuss a custom order, please feel free to contact us.
){kind=link}